Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 75

1.6 Default panel
6 Default panel
>Cancel<
The Default panel menu lets you clear all settings and repeat the initial
installation.
Caution: This command deletes all programming settings, including users.
See "Initial start-up" on page 43 for more details.
Caution: After defaulting panel, restart the system by powering it down and up.
1.7 Can Inst.time
7 Cancel in.time
Disable?
The Cancel installer in-time menu lets you disallow the Installer in function before
the Installer in-time expires (see "8.1.3.6 Installer in-time" on page 141).
Note: This option is only valid if the installer requires a user authorization. See
"8.2.1 User code required" on page 143.
Use this function after the panel programming is complete. To cancel the installer
in-time, go to this menu and press Enter. Next, log out. After this, the installer log
in requires another user confirmation.
See also "8.2.1 User code required" on page 143.
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 65