Selection Of The Diagnosis Area - Siemens SINUMERIK 840C Installation Instructions Manual

4 MMC Area Diagnosis
4.1.3 Printing screen hardcopies
4.1.4

Selection of the Diagnosis area

Select the DIAGNOSIS area with this softkey in the area menu bar. The initial
Diagnosis display that appears shows you the alarms currently pending.
With the vertical softkey bar it is possible to switch to the display of the current
messages.
Fig. 4.2
With these softkey functions you can sort the alarms/messages currently pending
Display by
by priority or chronologically.
priority
Display by
time
Press this softkey to display the current messages
Messages
Switch back to display of the alarms
Alarms
See Section "Simplified language switchover"
Language/
Sprache
See Section "Password"
Password
See Section 3, Start-up PLC
PG function
4–4
Initial display of the diagnosis area
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
SINUMERIK 840C (IA)