Standard Installation And Start-Up As Flowchart (Up To Sw 2 Only) - Siemens SINUMERIK 840C Installation Instructions Manual

09.95
2 General Reset and Standard Start-Up

2.10 Standard installation and start-up as flowchart (up to SW 2 only)

2.10 Standard installation and start-up as flowchart (up to SW 2 only)
START
Voltage test
Functional test
NC-MD
PLC-MD
Axis start-up
Spindle start-up
Test run
Save data to
HD of MMC CPU
END
2-15
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)