Siemens SINUMERIK 840C Installation Instructions Manual page 83

4 MMC Area Diagnosis
4.3 Drive service displays for spindle (MSD) and axis (FDD) – as from SW 3)
Parking axis setpoint This display field shows the status of parking axis of cyclic control word 1
(drive MD 11004.1)
Possible display range: off or on
Travel to fixed stop This display field contains the status of Travel to fixed stop of cyclic status word 2
actual (drive MD 11003.13)
Possible display range: off or on
Speed setpoint This display field contains the status of speed setpoint smoothing of cyclic status
smoothing actual value word 1 (drive MD 11002.11).
Ramp-function This display field contains the status of ramp-function generator rapid stop of
generator rapid cyclic status word 1 (drive MD 11002.9).
stop actual value Possible display range: off or on
V/F mode This display field contains the status of V/F mode of cyclic status word 2
(drive MD 11003.12).
Possible display range: off or on
2nd torque limit This display field shows the status of 2nd torque limit of cyclic status word 1
actual value (drive MD 11002.10).
Possible display range: off or on
Integrator inhibit This display field shows the status of the integrator inhibit of cyclic status word 1
actual value (drive MD 11003.6).
Possible display range: off or on
Motor temperature This display field shows the state of the motor temperature warning
warning (drive MD 11006.14)
Possible display range: off or on
Heat sink temperature This display field shows the state of the heat sink temperature warning
warning (drive MD 11006.15)
Possible display range: off or on
Ramp-up completed This display field shows the current status of the message Ramp-function
(SW 4) procedure completed (drive MD 11007.0).
IM I < M (SW 4) This display field shows the current status of the message IM
d dx
11007.1).
In I < n (SW 4) This display field shows the current status of the message In
act min
11007.2).
In I < n (SW 4) This display field shows the current status of the message In
act x
11007.3).
n < n (SW 4) This display field shows the current status of the message n
set act
11007.4).
Variable message This display field shows the current status of the message Variable message
function (SW 4) function (drive MD 11007.5).
4–20
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
I < M (drive MD
d dx
I < n (drive MD
act min
I < n (drive MD
act x
< n (drive MD
set act
SINUMERIK 840C (IA)