Installation Checklist 840C - Siemens SINUMERIK 840C Installation Instructions Manual

03.95
1.4

Installation Checklist 840C

Installation sequence
Section 1 of the Installation Guide, Interface Description Part 2, and the information
presented in the Instruction Manual must be carefully observed!
Copy the installation checklist, fill it out, and enclose it in the log book after installation.
Make a cross next to Yes or No after each section has been completed.
Enter all required values where stated.
Information relating to the individual sections is provided in the Installation Guide.
First installation
Name . . . . . . . . . . . . . . . . . . . .
Manufacturer . . . . . . . . . . . . . . .
Second installation
Name . . . . . . . . . . . . . . . . . . . .
Customer . . . . . . . . . . . . . . . . .
.
1 Are the prerequisites for installation per Section 1 fulfilled?
2. Visual inspection:Mains connection, EMERGENCY STOP,
grounding concept, grounding of the position
encoders, cabling, shielding, external machine
control panel, input/output modules, overall state
OK?
3. Version of the control software:
4. Voltage test: Power supply unit in the central controller
Monitor
Operator panel
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
F-No. . . . . . . . . . . . . . . . . . . . . .
Office . . . . . . . . . . . . . . .
Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Office . . . . . . . . . . . . . . .
Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NCK . . . . . . . . . . . . . . . . . . . . . . . . .
MMC . . . . . . . . . . . . . . . . . . . . . . . . .
PLC . . . . . . . . . . . . . . . . . . . . . . . . .
INT-DMP . . . . . . . . . . . . . . . . . . . . . . . . .
WOP-M/T . . . . . . . . . . . . . . . . . . . . . . . . .
SIMULATION-M . . . . . . . . . . . . . . . . . . . . . . . . .
S5/MT on MMC . . . . . . . . . . . . . . . . . . . . . . . . .
230 V AC (90...260 V), 50/60 Hz (45...65 Hz).
24 DC (20...30 V)
230 V AC (90...260 V), 50/60 Hz (45...65 Hz).
230 V AC/24 V DC
6FC5197- AA50
1 Prerequisites and Visual Inspection
1.4 Installation Checklist 840C
Date . . . . . . . . .
Date . . . . . . . . .
Yes No
Yes No
1–7