Selection Of/Menu Trees Of Drive Servo Start-Up Application - Siemens SINUMERIK 840C Installation Instructions Manual

9 Drive Servo Start-Up Application (as from SW 3)
9.1.1 Selection of/menu trees drive servo start-up application
9.1.1

Selection of/menu trees of drive servo start-up application

Explanation The drive servo start-up display (identical to the machine configuration display
MDD) is called by means of the "Diagnosis", "Start-up" and "Drive servo startup"
softkeys.
Note The Drive servo startup function takes approximately 30 s to load and is com-
mented with the flashing text "Wait" during loading.
Fig. 9.1
Explanation The drive servo start-up display (= machine configuration display) provides an
overview of the current axis/spindle configuration and functions purely as a dis-
play (see also description of machine configuration in machine data dialog).
9–4
Drive servo
startup
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
Diagnosis
Start-up
SINUMERIK 840C (IA)