Siemens SINUMERIK 840C Installation Instructions Manual page 591

7 Drive Machine Data (SIMODRIVE Drive MD)
7.4.3 Diagnosis/service MD (data description - as from SW 3)
12000
Default value
–
Output of currently valid position actual value which is dependent on the position control for
rotary axes (NC-MD 5640.5) and position control resolution (NC-MD 18000.0-3). The
information is output in the drive service displays.
12001
v-max (FDD)/n-setpoint max (MSD) (as from SW 4)
Default value
–
12002
Default value
–
12003
Default value
–
7–176
Position actual value
Lower output limit
-99999999
Lower output limit
–
Position controller cycle (as from SW 4)
Lower output limit
–
Actual gear stage (as from SW 4)
Lower output limit
–
©
Siemens AG 1992 All Rights Reserved
Upper output limit
99999999
Upper output limit
–
Upper output limit
–
Upper output limit
–
SINUMERIK 840C (IA)
04.96
Active
at once
Units
–
Active
Units
–
Active
Units
–
Active
Units
–
6FC5197- AA50