Edit List - Siemens SINUMERIK 840C Installation Instructions Manual

09.95
5.7.1

Edit list

Select the softkey edit list in the User display area.
Edit
list
Fig. 5.11
Explanation The header contains information about the display format and addressing the
data.
TEA1 8 NC MD – additional possibilties TEA2, TEA3
Parameters that
a 8 axis-specific – additional possibilities:
must not be altered
Parameters that N9 T35 V12 U10: Column widths:
can be changed
(for display layout)
Explanation The machine data to be displayed must first be entered in the correct list (axis-
specific, spindle-specific etc.). The data of the first axis or spindle (e.g. NC MD
3840) must always be entered for axis/spindle-specific NC data. When entering a
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
Only the parameters for the display layout in the header
may be altered.
n = General NC MD
k = Channel (c)
s = Spindle
vsa = Digital feed drive (fdd)
hsa = Digital main spindle drive (msd)
Date number N = 9
Text T = 35
Value V = 12
Unit U = 10
5 Machine Data Dialog (MDD – as from SW 3)
5.7.1 Edit list
5–31