Reinstallation Of Existing And New Drive Components Using The Existing Drive Files (Tea3) - Siemens SINUMERIK 840C Installation Instructions Manual

Siemens computer drive installation instructions

Hide thumbs Also See for SINUMERIK 840C:

Table of Contents

5.9.7 Reinstallation of existing and new drive components using the existing drive files (TEA3)

Reinstallation of existing and new drive components using the

existing drive files (TEA3)

You require a two-tier configuration, i.e. a 2nd module group is to be added.

TEA3 user files already exist for the individual modules and motors.

Select the File functions softkey in the configuring display and then operate the

(1st method)

Load from disk softkey. A menu bar appears in which you enter the existing

TEA3 files together with the file names and then select the Config area with the

Operate the Load start softkey. The data are loaded into the drive. Confirm these

settings with the Accept conf + NCKP0 softkey.

Again select the drive configuration display and the File functions softkey. Using

(2nd method)

the Load from disk softkey, load the TEA3 files in the Drives area into the drive

using the Load start softkey. Confirm this setting with the Accept all + NCKP0

SINUMERIK 840C (IA)

5 Machine Data Dialog (MDD – as from SW 3)

Show Quick Links

Table of Contents

Simodrive 611-d