5 Machine Data Dialog (MDD – as from SW 3)
5.9 Procedure for altering configurations
5.9
Procedure for altering configurations
5.9.1
Standard installation of digital drives (as from SW 3)
Specifications (Example) Drive modules
Module slots:
(Installation location) Slot 2:
Entering the
Set the configuration from the specified values in the configuration display. Select
drive configuration
the actual module type using the Select module softkey. Confirm these settings
with the Accept Conf + NCKP0 softkey.
Fig. 5.16
5–42
1 double axis FDD module
2 single axis FDD module
1 MSD module
Slot 1:
MSD module
free
Slot 3:
free
Slot 4:
2 axis FDD module
Slot 6:
1 axis FDD module
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
SINUMERIK 840C (IA)