Setpoint-Actual Value Matching For Axes And Spindles - Siemens SINUMERIK 840C Installation Instructions Manual

5 Machine Data Dialog (MDD – as from SW 3)

5.2.3 Setpoint-Actual value matching for axes and spindles

5.2.3 Setpoint-Actual value matching for axes and spindles
The following NC machine data still have to be set before you can operate the
drives after drive installation. You will find them by pressing the Diagnosis/Start-
up/Machine data/NC MD softkeys for the Axes (FDD) or Spindles (MSD) and
then Basic MD softkey.
Note In the case of digital drives you should first enter the drive configuration before
the axis/spindle assignment.
Example axis (FDD) Setpoint/actual value
MD 3840
MD 3840/2–3
MD 3840/6–7
MD 3840/4–5
MD 18240.2
MD 2000
MD 2000/2–3
MD 2000/6–7
MD 2000/4–5
Example spindle (MSD) Setpoint/actual val. assign. spindle 1
MD 4600
MD 4600/2–3
MD 4600/6–7
MD 4600/4–5
MD 5220.2
MD 4000
MD 5200.1
MD 4000/2–3
MD 4000/6–7
MD 4000/4–5
Note Machine data MD 3840, MD 2000, MD 4600 and MD 4000 display the
assignments of each of the setpoints and actual values.
5–14
Axis1
Setpoint output
Setpoint on digital drive
Drive/measuring circuit mo-
dule number
SPC/HMS setpoint output
Multiple assignment
setpoints (611D)
1st measuring system con-
nection
Actual value of digital drive
Drive/measuring circuit mo-
dule number
Measuring circuit connection
number
Setpoint output
Setpoint on digital drive
Drive/measuring circuit mo-
dule number
SPC/HMS setpoint output
Multiple assignment
setpoints (611D)
Measuring system
connection
Sign change actual value
Actual value of digital
drive
Drive/measuring circuit mo-
dule number
Measuring circuit connection
number
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
analog digital
MC1.4 FDD1.0
No Yes
1 1
4 0
No No
MC1.1 FDD1.1
No Yes
1 1
1 1
analog digital
MC1.6 MSD1.0
No Yes
1 1
6 0
No No
MC1.3 MSD1.1
No No
No Yes
1 1
3 1
SINUMERIK 840C (IA)