Siemens SINUMERIK 840C Installation Instructions Manual page 973

12 Functional Descriptions
12.19.5 Interpolation and compensation with tables
N0250 @40c K11 K2 K0
@714
G200 Y
N0255 G0 Y200
N0260 X300
N0270 @100 K300
N0281 M00 (error 1)
@100 K300
N0282 M00 (error 2)
@100 K300
N0283 M00 (error 3)
N0285 @30c R31 K56 K1
@100 K300
N0284 M00 (error 4)
N0285 @30c R31 K56 K1
N0300 M02
IKA status displays in T55 and T66
Code
-2
-1
0
1
2
3
4
5
12–198
5. Deactivate and retract
- Deactivate IKA 2
- Synchronization of actual value system
- Retract
Jump to end
6. Errors
T55=1: only one pointer <> 0 !
T55=2: End pointer <= start pointer!
T55=3: Input[n+1] <= input[n] !
- Read current point number n [> R31]
T55=4: Gradient > 1 !
- Read current point number n [> R31]
7. End
Text Significance
Running Calculation running
Requested Calculation requested
Calculated Curve calculated
0 pointer Start or end pointer is equal to zero
Start > End Start pointer is greater than stop pointer
Position point The position of one point is wrong
Gradient point Gradient of one point is wrong.
The point is then stored in T56.
Both pointers in the table are zero.
© Siemens AG 1992 All Rights Reserved
01.99
6FC5197- AA50
SINUMERIK 840C (IA)