File Functions (Sequence Of Operation - As From Sw 3); 1St Level: File Functions - Siemens SINUMERIK 840C Installation Instructions Manual

Siemens computer drive installation instructions

Hide thumbs Also See for SINUMERIK 840C:

Table of Contents

File functions (sequence of operation – as from SW 3)

Press the Diagnosis, Start-up, Machine data and File functions softkeys to call

the 1st level file functions display.

A new file can be created. You are prompted to enter a name.

Select a file that already exists from the manufacturer (Siemens) or user field.

Only the BOOT file cannot be selected. It is a special file required for the drive

installation. The selected file is displayed in the data record field in the

configuration display.

Files already existing can be deleted together with their contents in the display

field. First select the file to be deleted. Caution, if you select the BOOT file in the

Siemens branch (above) you will delete its contents!

SINUMERIK 840C (IA)

5.8.4 File functions (sequence of operation – as from SW 3)

5 Machine Data Dialog (MDD – as from SW 3)

Show Quick Links

Table of Contents

Simodrive 611-d