09.95
Fig. 5.14
Explanation
The functions of the individual softkeys are the same as for the first level.
Notes
With the Save to disk softkey, you can choose between Conf (8 drive configu-
ration only) and All.
With the Load from disk softkey, you can choose between Conf (8 drive config-
uration only) and Drives (8 drive MD without configuration), i.e. loading of a
TEA3 file (drive) in the 2nd level is always carried out in 2 stages (see drive
installation/start-up).
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
5 Machine Data Dialog (MDD – as from SW 3)
5.8.4 File functions (sequence of operation – as from SW 3)
5–39