Siemens SINUMERIK 840C Installation Instructions Manual page 68

09.95
Service
display
Start-up
A
Fig. 4.3
Alarm log 1
Default setting: All alarms and messages are included.
Default setting: All reset and power ON alarms are included.
Alarm log 2
Note: Both files are configured in the CONFIG file.
Fig. 4.4
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
Alarm log 1
4 MMC Area Diagnosis
4.1.4 Selection of the diagnosis area
4–5