K01 To K05, Safety License For 1 To 5 Axes - Siemens SINAMICS S120 Manual

Options

9.9 K01 to K05, safety license for 1 to 5 axes

Shield connection of the TB30 on the Control Unit
Figure 9-15
The permissible bending radii for the cables must not be exceeded when the cables are
being installed.
9.9 K01 to K05, safety license for 1 to 5 axes
Availability of option
This option is available for the following S120 Cabinet Modules:
● Motor Modules
Description
The Safety Integrated Basic functions do not require a license. A license is, however,
required for each axis with safety functions in the case of Safety Integrated Extended
functions. It is irrelevant which safety functions are used and how many.
In this case, option K01 is for 1 axis, option K02 for 2 axes etc. - up to option K05 for 5 axes.
● K01: Safety license for 1 axis
● K02: Safety license for 2 axes
● K03: Safety license for 3 axes
● K04: Safety license for 4 axes
● K05: Safety license for 5 axes
314
TB30 shield connection
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A