Setting Up An Acquisition Method - Agilent Technologies Revident LC/Q-TOF System User Manual

4 Basic Operation

Setting Up an Acquisition Method

Setting Up an Acquisition Method

1 Set up the method in the Method Editor window:
2 Enter values for all of the LC modules configured for the instrument.
3 Enter the MS Q-TOF parameter values.
70
a Enter or select the values and settings for each of the tabs below.
b Optional. To apply the settings to the instrument, click
c To save the method, click
d Name the method and click OK.
a On the Acquisition tab, select the acquisition mode from the list in the
System Settings table. The Acquisition Parameters table is changed
accordingly when you change the acquisition mode. The parameters
available on the right change depending on the acquisition mode.
Save As.
Agilent Revident LC/Q-TOF System User Guide
Apply.