Run Screens; Run Screen When Run Is In-Progress - Agilent Technologies Magnis G9710A User Manual

Run screens

Run screen when run is in-progress

Purpose: To monitor the real-time progress of a protocol run.
To open: Opens automatically after starting a protocol run.
Figure 75 Run screen when protocol run is in-progress
NOT E
Time Remaining
The time displayed is the estimated time remaining (hh:mm:ss) until completion of the protocol.
Protocol steps
List of protocol steps. Current step is highlighted.
Stop
Press the red square next to Stop to abort the run. A warning message opens asking you to
confirm that you want to abort the run.
NOT E
Magnis and MagnisDx NGS Prep System User Guide
When a run is in-progress you cannot use the touchscreen to perform other
functions. The Run screen must remain open through the duration of the run.
Once you stop a run, the run cannot be resumed, and the labware used in that
run cannot be reloaded for a future run.
92