14/LIGHT SYSTEM, INSTRUMENTS
Adjust the headlight range
17.17
Changing the parking light bulb
17.18
Note
Damage to reflector Reduced luminance.
–
Grease on the bulb will evaporate due to the heat and be deposited on the reflector. Clean the bulb and keep it free of grease
before mounting.
–
Check the headlight setting. (
–
Adjust the beam distance of the headlight by turning screw
Guideline
For a motorcycle with rider, and with luggage and a passenger if applicable, the
light/dark boundary must be exactly on the lower mark (applied in: Checking
headlight adjustment).
Info
Turn clockwise to increase the light range, turn counterclockwise to reduce
the light range.
100748-10
If you have a payload, you may have to correct the headlight range.
–
Switch off all power consumers and the engine.
–
Remove screws
100745-10
–
Release the latch
–
Remove the lamp cover
100746-10
–
Pull the parking light
–
Remove the light bulb.
–
Position a new light bulb in the holder.
Parking light (W5W/ base W2.1x9.5d) (
–
Carefully position the holder with the bulb in the holder in the headlight.
100747-10
p. 110)
. Remove the cover.
.
.
carefully out of the holder.
p. 411)
111
.