38/LUBRICATION SYSTEM
–
Remove screws
–
Take off the left exhaust cover
100771-10
–
Place a suitable container under the engine.
–
Remove screws
–
Remove oil filter
Circlip pliers reverse (51012011000) (
200557-10
–
Position the special tool with the O-ring. Mount and tighten the screws.
Guideline
Remaining engine screws
Oil pressure testing adapter (75029094000) (
–
Connect the pressure testing tool to the special tool without the t-plate.
Pressure testing tool (61029094000) (
–
Check the engine oil level. (
200558-10
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
–
When running the engine, always make sure there is sufficient venti-
lation, and do not start or run the engine in a closed space without an
effective exhaust extraction system.
–
Start the engine and let it warm up.
–
Check the engine oil pressure.
Engine oil pressure
.
.
. Take off the oil filter cover with the O-ring.
.
p. 440)
M5
p. 443)
p. 209)
6 Nm (4.4 lbf ft)
p. 448)
214