41/THROTTLE VALVE BODY
Flashing the EFI control unit
29.15
–
Overwrite the entry under the "Please enter VIN:" heading.
–
Press "Continue".
–
Select "Code entry".
–
"Please enter the Code"
–
Press "Continue".
The new VIN is written to the EFI control unit.
–
Switch to the main menu.
–
Select "Show identification".
–
Compare the old VIN to the new VIN.
The new VIN is shown.
Condition
The ignition is on.
The diagnostic tool is connected and running.
–
Select the model.
–
Select "ECU Diagnosis".
–
Mark the "Engine management EFI LC8 RC8" control unit.
–
Press "Continue".
–
Select "ECU Flashing".
–
"Please enter the password:"
–
Press "Continue".
–
Read the safety information and set up the required conditions.
400687-60
–
Confirm the instruction by clicking on "OK".
–
Press "Select file" and select the new mapping.
Info
"The BLZ file and the exhaust system must match!"
–
Press the "ECU flash process" button.
–
Read the safety notice and confirm with "OK".
The new mapping is loaded.
228