ENGINE CONTROL TROUBLE CODE
Manifold absolute pressure sensor cylinder 1 - checking the power supply
–
Measure the voltage between the specified points.
Manifold absolute pressure sensor cylinder 1, connector DP pin 1 – Measuring point Ground (−)
Voltage
»
If the specifications have not been met:
–
Check connector DP pin 1.
–
Check the cable from connector DP pin 1 to the next node in the wiring harness for opens.
»
If the specifications have been met:
–
Replace the manifold absolute pressure sensor cylinder 1.
400590-10
400658-10
4.9... 5.1 V
254