01/FORK, TRIPLE CLAMP
–
Remove adjusting tube
200611-10
–
Screw special tool
Gripping tool (T14026S1) (
–
Remove the special tool from the hexagonal piece.
Open-end wrench (T14032) (
–
Release special tool
Gripping tool (T14026S1) (
200612-10
–
Unclamp the fork leg and clamp it with the axle clamp.
–
Pull out pin
200613-10
–
Pull collar bushing
special tool.
–
Unscrew the special tool.
–
Remove the collar bushing.
–
Remove spring
–
Unclamp the fork leg.
Info
Hold the fork leg by the axle clamp.
200614-10
–
Drain the fork oil.
Info
Pull out the piston rod and push back in a number of times to empty the
cartridge.
–
Pull outer tube
200615-10
.
onto the piston rod and pull it up.
p. 449)
p. 450)
.
p. 449)
of the special tool.
off of aluminum tube
.
off of inner tube
.
. Slide the aluminum tube over the
23