ENGINE CONTROL TROUBLE CODE
Rollover sensor - check the signal wire for a short circuit to sensor ground
–
Measure the resistance between the specified points.
Break Out Box AO pin 4 – Break Out Box AO pin 7
Resistance
»
If the specifications have not been met:
–
Check the cable from EFI control unit connector AO (
nector AP (
»
If the specifications have been met:
600850-11
–
Contact customer service.
∞ Ω
p. 393) pin 5 for a short circuit to sensor ground.
365
p. 392) pin 4 to con-