38/LUBRICATION SYSTEM
–
Remove screws
–
Take off the left exhaust cover
100771-10
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Remove the oil filter. (
–
Completely drain the engine oil.
100772-10
–
Thoroughly clean the magnet
100773-10
–
Mount and tighten the oil drain plugs with the magnet, O-rings and oil screen.
Guideline
Oil drain plug
–
Install the oil filter. (
100772-11
.
.
with the magnet, O-rings and oil screen.
p. 211)
and oil screen
M20x1.5
p. 212)
of the oil drain plug.
20 Nm
(14.8 lbf ft)
210