Installing The Front Cylinder Head; Installing The Front Camshafts - KTM 1190 RC8 R EU/UK 2009 Repair Manual
Hide thumbs
Also See for 1190 RC8 R EU/UK 2009:
- Owner's manual (283 pages) ,
- Owner's manual (272 pages) ,
- Owner's manual (273 pages)
Table of Contents
Advertisement
30/ASSEMBLING THE ENGINE
Installing the front cylinder head
21.36
Installing the front camshafts
21.37
–
Remove the cloth.
–
Keep the timing chain tensioned. Push the cylinder down carefully and let the
dowel pins engage.
301375-10
–
Mount the new cylinder head gasket.
–
Mount the cylinder head. Mount and tighten the new cylinder head screws
Guideline
Cylinder head screw
301376-10
–
Mount and tighten nuts
Guideline
Nut, cylinder head
–
Pull up the timing chain and insert intake camshaft
Info
The intake camshaft is labeled with ev.
–
Place the timing chain over the rear sprocket of the intake camshaft.
Marking
–
Position exhaust camshaft
Info
The exhaust camshaft is labeled with av.
–
Place the timing chain over the rear sprocket and position the camshaft in the
bearing seat.
Marking
301377-10
M11x1.5
with the washers.
is aligned.
.
is aligned.
Tightening
lubricated with
sequence:
engine oil
Using a criss-
cross pattern
Step 1
15 Nm
(11.1 lbf ft)
Step 2
30 Nm
(22.1 lbf ft)
Step 3
90°
Step 4
90°
M6
10 Nm (7.4 lbf ft)
.
182
.
Advertisement
Table of Contents
