01/FORK, TRIPLE CLAMP
performing a fork service
5.9
Info
These operations are the same on both fork legs.
Disassembling the fork legs
5.10
Info
These operations are the same on both fork legs.
–
Pull the front brake and compress the fork powerfully a few times.
The fork legs straighten.
–
Tighten screws
Guideline
Fork end pinch bolts
100782-11
Condition
The fork legs have been removed.
–
Disassemble the fork legs. (
–
Disassemble the outer tubes. (
–
Change the lower DU bush. (
–
Check the fork legs. (
–
Assemble the outer tubes. (
–
Assemble the fork legs. (
201097-01
Condition
The fork legs have been removed.
–
Determine and note down the current setting of rebound damping
sion damping
–
Completely open the adjusting elements of the rebound and compression damping.
–
Determine and note down the current setting of spring preload
–
Completely open the adjusting elements of the spring preload.
200605-10
.
p. 21)
p. 24)
p. 26)
p. 25)
p. 27)
p. 27)
.
M8
15 Nm
(11.1 lbf ft)
and compres-
.
21