Service Schedule; Important Service Tasks To Be Carried Out By An Authorized Ktm-Rc8 Workshop - KTM 1190 RC8 R EU/UK 2009 Repair Manual

SERVICE SCHEDULE

Important service tasks to be carried out by an authorized KTM-RC8 workshop.

42.1
Engine Change the engine oil and filter, clean the oil screens. (
Check the valve clearance. (
Replace the spark plugs.
Check the engine attachment bolts and other engine bolts accessi-
ble from outside to ensure that they are tight.
Check the clutch.
Check / clean the oil jet for clutch lubrication. (
Fuel injection Read out the status request and fault memory with the KTM diag-
nostics tool.
Check bellows for tears and leaks, and check the linkage of the
throttle valve spigot for freedom of movement.
Check the wiring harness of the throttle valve body for damage and
correct routing.
Check hoses of vacuum sensors, SLS hoses and vent hoses for
damage, correct routing and leaks.
Check the fuel hose for damage, correct routing and leaks.
Check the fuel pressure. (
Attachments Check the cooling system for leaks.
Check the water pump for leaks (visual check).
Check the coolant level. (
Check the antifreeze. (
Check radiator fan operation.
Check the exhaust system for leaks and correct fitting and check
that the exhaust brackets are tight.
Check the control cables for damage, smooth operation, kink-free
routing and adjustment.
Check the fluid level of the hydraulic clutch. (
Check the air filter and change if necessary. Clean the air filter
box.
Drain the drainage hose of the air filter box.
Check cables for damage and kink-free routing.
Check the headlight setting. (
Check that the electrical equipment is functioning properly.
Check the fairing parts for damage and breakage.
Check the fasteners for tightness.
Brakes Check the front brake linings. (
Check the rear brake linings. (
Check the front brake discs. (
Check the rear brake disc. (
Check the front brake fluid level. (
Check the rear brake fluid level. (
Change brake fluid.
Check that brake lines are undamaged and free of leaks.
Check the braking.
Check the bolts and guide pins of the brake system for tightness.
Chassis Check the operation of the forks and the rear shock absorber, also
check for leaks.
Bleed fork legs. (
Check the steering head bearings and adjust if necessary.
Check the swingarm bearings.
Check deflector.
Check the eccentric shaft adjustment.
p. 200)
p. 73)
p. 194)
p. 194)
p. 110)
p. 93)
p. 96)
p. 80)
p. 83)
p. 95)
p. 99)
p. 16)
K10N
p. 209) •
•
p. 216)
•
•
•
•
•
•
•
•
•
•
p. 191)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
K75A K150A J1A
• • •
•
•
• •
•
•
• •
•
•
• • •
• • •
• •
• • •
• •
• • •
• • •
• •
• •
• • •
• • •
•
• • •
• •
• • •
• • •
• •
• •
• •
• •
• •
• •
• • •
• • •
•
• • •
• • •
• •
• • •
• • •
• •
• •
•
•
420
J2A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•