04/SHOCK ABSORBER, SWINGARM
Servicing the shock absorber
8.8
Removing the spring
8.9
Condition
The shock absorber has been removed.
–
Remove the spring. (
–
Disassemble the damper. (
–
Disassemble the piston rod. (
–
Check the damper. (
–
Assemble the piston rod. (
–
Assemble the damper. (
–
Install the spring. (
201094-01
Condition
The shock absorber has been removed.
–
Clamp the shock absorber into the vice with soft jaws.
–
Measure and note the spring length while the spring is under tension.
–
Loosen screw
–
Turn the adjusting ring until the spring is no longer under tension.
Hook wrench (T106S) (
200561-01
–
Remove spring retainer
–
Remove the spring.
200562-01
p. 48)
p. 49)
p. 50)
p. 51)
p. 52)
p. 53)
p. 59)
.
p. 448)
.
48