KTM 1190 RC8 R EU/UK 2009 Repair Manual page 153

30/ENGINE - WORK ON INDIVIDUAL PARTS
–
Tension the valve spring with a special tool.
Valve spring mounter (59029019000) (
Valve spring mounting device (78029060000) (
–
Mount valve keys
Info
When mounting the valve keys, check that they are seated correctly; prefer-
ably, fix the valve keys to the valve with a little grease.
200469-10
–
Place shims
200468-10
–
Position the cam lever and mount cam lever axles
–
Mount plugs
Guideline
Plug, cam lever axis
200467-11
–
Mount oil pressure sensor
Guideline
Oil pressure sensor
Info
This only applies to the front cylinder head!
–
Mount engine coolant temperature sensor
Guideline
200466-10
Coolant temperature sensor
. Release the tension on the valve spring.

into the valve spring retainer according to the installation position.

with new O-rings.

.

p. 440)
p. 448)
.

M10x1 15 Nm
(11.1 lbf ft)
M10x1 10 Nm (7.4 lbf ft)
.

M12x1.5 12 Nm (8.9 lbf ft)
151