30/ASSEMBLING THE ENGINE
Installing the left suction pump
21.12
Setting the engine to ignition top dead center of the rear cylinder
21.13
–
Mount pin
–
Mount internal rotor
Marking
nal rotor is not.
–
Oil the parts.
301405-10
–
Insert new gasket
–
Position oil pump cover
Guideline
Screw, oil pump cover
–
Turn the oil pump gear wheel and check the oil pumps for smooth operation.
301406-10
–
Set the crankshaft to top dead center of the rear cylinder.
The position notch of the crankshaft is visible in the hole.
–
Screw in special tool
Engine blocking screw (61229015000) (
301382-10
.
and external rotor
of the internal rotor is visible after mounting while that of the exter-
into the oil pump cover.
. Mount and tighten screws
M6
.
.
.
Loctite
243™
10 Nm
®
(7.4 lbf ft)
p. 444)
169