KTM 1190 RC8 R EU/UK 2009 Repair Manual page 273

ENGINE CONTROL TROUBLE CODE
–
Check the next possible cause:
Engine coolant temperature sensor cylinder 1 - the ground wire has an open (
Engine coolant temperature sensor cylinder 1 - the ground wire has an open
Condition
The ignition is off.
The EFI control unit is disconnected. (
The break out box is connected to the wiring harness.
Engine coolant temperature sensor for cylinder 1 is disconnected. (
Engine coolant temperature sensor cylinder 1 - check the ground wire for opens
–
Measure the resistance between the specified points.
Break Out Box AO pin 7 – Engine coolant temperature sensor cylinder 1 connector AX pin 1
Resistance
» If the specifications have not been met:
–
Check EFI control unit connector AO (
–
Check the cable from EFI control unit connector AO (
» If the specifications have been met:
–
Contact customer service.
p. 227)
600850-11
p. 392) pin 7 and connector AX pin 1.
p. 271)
p. 198)
400586-10
≤ 0.6 Ω
p. 392) pin 7 to connector AX pin 1 for opens.
271