14/LIGHT SYSTEM, INSTRUMENTS
–
Remove screws
100745-10
–
Release the latch
–
Remove the lamp cover
100746-10
–
Disconnect plug-in connector
–
Push off the retaining clamp
–
Remove headlight bulb.
–
Position the new headlight bulb in the headlight housing.
Low beam / high beam (H7 / base PX26d) (
Info
Insert the headlight bulb so that the lug is positioned in the cut-out.
700299-01
–
Position the retaining clamp.
–
Position the plug-in connector.
–
Position the lug
–
Check that the lighting is functioning properly.
400422-11
–
Position the cover.
Info
Check for correct positioning and freedom of movement of the brake lines.
–
Mount and tighten screws
Guideline
Remaining chassis screws
100745-11
. Remove the cover.
.
.
.
on both sides, squeeze and fold to the side.
of the lamp cover in the notch. Engage the latch.
.
M6
p. 411)
10 Nm (7.4 lbf ft)
114