ENGINE CONTROL TROUBLE CODE
Manifold absolute pressure sensor cylinder 2 - check the signal wire for a short circuit to the
sensor power supply
–
Measure the resistance between the specified points.
Break Out Box AO pin 24 – Break Out Box AO pin 1
Resistance
»
If the specifications have not been met:
–
Check the cable from EFI control unit connector AO (
nector DP (
600850-11
»
If the specifications have been met:
–
Change the manifold absolute pressure sensor cylinder 2.
∞ Ω
p. 400) pin 3 for a short circuit to the sensor power supply.
376
p. 392) pin 24 to con-