30/ENGINE
–
Remove screws
–
Remove screws
200521-10
–
Shift into first gear.
Info
The purpose is to loosen the nut of the engine sprocket.
–
Remove screws
200522-10
–
Remove screws
–
Remove screw
–
Remove screws
200523-10
–
Remove screws
–
Remove the rear brake system. (
200524-10
–
Position the floor jack under the engine and screw it on using the special tool.
Floor jack attachment (61229055000) (
–
Fix the front wheel. Secure the motorcycle against falling over with belts. Remove
the work stand from the rear.
200527-10
–
Remove the nut of the engine sprocket with the lock washer. Take off the engine
sprocket.
200528-10
. Remove the slave cylinder with the spacer and sleeves.
. Take off the engine sprocket cover.
. Remove the chain securing guide with the spacer.
. Remove the side stand bracket.
with the washers. Take off the shift shaft deflection.
. Take off the footrest bracket.
. Take off the horn holder.
p. 101)
p. 447)
116