04/SHOCK ABSORBER, SWINGARM
–
Fill the damper cartridge about half full.
Shock absorber oil (SAE 2.5) (50180342S1) (
200587-01
–
Lubricate O-ring
Lubricant (T158) (
–
Carefully mount the piston rod.
200568-11
–
Mount seal ring retainer
–
Mount lock ring
Info
Do not scratch the inside surface.
–
Pull out the piston rod until the seal ring retainer rests against the lock ring.
200566-11
–
Mount locking cap
–
Bleed and fill the damper. (
–
Fill the damper with nitrogen. (
200588-01
–
Mount rubber cap
–
Mount adjusting ring
The collar faces the spring.
200563-11
Alternative 1
–
Turn adjusting screw
click.
–
Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort
Standard
200596-01
Sport
Full payload
of the seal ring retainer.
p. 438)
and slide it under the ring groove.
.
of the damper cartridge.
p. 55)
p. 58)
of the reservoir.
and turn it all the way down.
clockwise with a screwdriver to the last perceptible
20 clicks
15 clicks
10 clicks
10 clicks
p. 437)
54