14/LIGHT SYSTEM, INSTRUMENTS
Resetting service display
17.15
Checking the headlight setting
17.16
A
0 0 A
–
Press the MODE button briefly.
Condition
The ignition is on.
The motorcycle is stationary.
–
Press the button
–
Press the button
info display.
–
Press the MODE button briefly.
–
Press the button
–
Press the button
SERVICE RESET.
–
Press the MODE button briefly.
SERVICE RESET appears in the info display.
ARE YOU SURE? flashes.
–
Press the button
The menu is closed.
–
Press the button
NEXT SERVICE AFTER is displayed.
400486-01
–
Adjust the distance to the next service using the button
–
Press the MODE button briefly.
The menu is closed.
400485-01
–
On a light-colored wall behind a horizontal area, make a mark as high as the center
of the low beam headlight.
–
Make another mark at a distance of
Guideline
B
0 0 B
Distance
–
Position the motorcycle at a distance of
gage and passenger if applicable, now mounts the motorcycle.
Guideline
400420-10
Distance
–
Switch on the low beam. Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle
is ready to operate with the rider mounted along with any luggage and a passen-
ger if applicable.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
and button
for 3-5 seconds.
twice until the symbol
appears in front of SETTINGS in the
and button
for 3-5 seconds.
repeatedly until the symbol
.
.
under the first mark.
5 cm (2 in)
away from the wall. The rider, with lug-
5 m (16 ft)
p. 111)
appears in front of
and the button
.
110