ENGINE CONTROL TROUBLE CODE
Side stand switch - the signal wire has a short circuit to ground (terminal 31)
Condition
The ignition is off.
The EFI control unit is disconnected. (
The break out box is connected to the wiring harness.
The electric starter lock control unit connector is disconnected. (
The side stand switch is disconnected. (
Side stand switch - check the signal wire for a short circuit to ground (terminal 31)
–
Measure the resistance between the specified points.
Side stand switch, connector AR pin 3 – Measuring point Ground (−)
Resistance
»
If the specifications have not been met:
–
Check the cable from EFI control unit connector AO (
minal 31).
»
If the specifications have been met:
–
Contact customer service.
–
Check the next possible cause:
Side stand switch - the signal wire has a short circuit to ground (terminal 31)
(
p. 362)
p. 227)
p. 40)
400584-10
p. 88)
400658-10
∞ Ω
p. 392) pin 26 to connector AR pin 3 for a short circuit to ground (ter-
362