34/Shift Mechanism; Adjusting Shift Lever Stub; Adjusting Shift Lever; Nm Loctite - KTM 1190 RC8 R EU/UK 2009 Repair Manual
Hide thumbs
Also See for 1190 RC8 R EU/UK 2009:
- Owner's manual (283 pages) ,
- Owner's manual (281 pages) ,
- Owner's manual (272 pages)
Table of Contents
Advertisement
34/SHIFT MECHANISM
Adjusting shift lever stub
24.1
Adjusting shift lever
24.2
Info
The footrest system offers many ways of adjusting the shift lever to your riding style and requirements.
–
Remove the screw
–
Position the shift lever stub with the screw in one of the holes
desired lever length.
Guideline
Standard
–
Tighten screw.
Guideline
Screw, shift lever stub
100703-10
–
Remove screws
–
The length of the shift rod can be adjusted by means of the screw thread.
Guideline
Shift rod
–
Loosen the counter nuts
–
Adjust the shift shaft.
Info
Make the same adjustments on both sides.
After the counter nuts have been tightened, the bearings of the shift shaft
must be central and aligned identically to each other in order to ensure free-
dom of movement in the bearing shells.
At least 5 screw threads must be screwed into the seating.
–
Tighten the counter nuts.
100704-10
with the shift lever stub.
Central hole
M6
and take off the shift rod.
115... 130 mm (4.53... 5.12 in)
.
according to the
10 Nm
Loctite
®
243™
(7.4 lbf ft)
192
Advertisement
Table of Contents
