Installing The Heim Joint - KTM 1190 RC8 R EU/UK 2009 Repair Manual

04/SHOCK ABSORBER, SWINGARM

Installing the heim joint

8.19
Info
The operations are the same for the upper and lower heim joints.
–
Clamp the shock absorber into the vice with soft jaws.
–
Remove collar bushing
–
Turn the shock absorber around and remove collar bushing
a drift.
200577-10
–
Remove seal rings
200578-10
–
Remove lock rings
200579-10
–
Place special tool
Pressing tool (T1207S) (
200580-10
–
Place special tool
cial tool .

Pressing tool (T1206) (
Pressing tool (T129) (
200581-10
of the heim joint with a drift.

on both sides.

on both sides.

underneath and push out the heim joint with special tool

p. 449)
underneath and push the heim joint to the middle using spe-

p. 449)
p. 449)
60
of the heim joint with

.
