15.9
Adjusting the headlight range
15.10
Changing the turn signal bulb (All EU/AR/ASEAN/BR models, All special models)
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service
life.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how
to apply the mark: Checking the headlight setting).
Info
V00369-10
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
Tighten screw
ELECTRICAL SYSTEM 15
p. 121)
p. 120)
1
.
1
.
121