41/THROTTLE VALVE BODY
Reinstalling the throttle valve body when the adjustments have been made
29.5
–
Mount connector
–
Connect the fuel hose. Mount the spring-loaded band-type clamp
cial tool.
Pliers for spring-loaded band-type clamp (60029057100) (
Info
The fuel hose must have a minimum distance of 4 mm to the throttle link-
age in all operating positions.
–
Position the throttle cables with guide piece
–
Slide the throttle valve body into the rubber sleeves.
200501-11
–
Position and tighten upper hose clamps
Guideline
Hose clip, intake flange
200500-11
–
Mount the cover. Mount and tighten screw
–
Position the retaining plates and holding brackets. Mount and tighten screws
200499-11
–
Fix plug-in connector
–
Connect plug-in connector
–
Mount manifold absolute pressure sensor
–
Install the air filter. (
200498-11
with the seal.
.
M4
.
with the holding bracket.
.
and plug in the connector.
p. 67)
using the spe-
p. 442)
.
1.5 Nm
(1.11 lbf ft)
222
.