Installing The Rear Timing Chain Tensioner; Installing The Front Timing Chain Tensioner - KTM 1190 RC8 R EU/UK 2009 Repair Manual

36/CYLINDER HEAD

Installing the rear timing chain tensioner

26.14

Installing the front timing chain tensioner

26.15
–
Prepare the timing chain tensioner for installation. (
–
After it has been positioned in the installation location, insert timing chain ten-
sioner with a new O-ring.

–
Mount and tighten plug
Guideline
Plug, timing-chain tensioner
200549-11
–
Remove screw
toward the timing chain.
Release device for timing chain tensioner (61229021000) (
The timing chain tensioner unlocks.
–
Mount and tighten screw
Guideline
Screw, timing chain tensioner release
200554-10
–
Prepare the timing chain tensioner for installation. (
–
After it has been positioned in the installation location, insert timing chain ten-
sioner with a new O-ring.

–
Mount and tighten plug
Guideline
Plug, timing-chain tensioner
200550-11
–
Remove screw
toward the timing chain.
Release device for timing chain tensioner (61229021000) (
The timing chain tensioner is unlocked.
–
Mount and tighten screw
Guideline
Screw, timing chain tensioner release
200555-10
with a new seal ring.

M24x1.5
and use the special tool to push the timing chain tensioner

.

M10x1
with a new seal ring.

M24x1.5
and use the special tool to push the timing chain tensioner

.

M10x1
207
p. 154)
25 Nm
(18.4 lbf ft)
p. 445)
10 Nm (7.4 lbf ft)
p. 154)
25 Nm
(18.4 lbf ft)
p. 445)
10 Nm (7.4 lbf ft)