MOTORCYCLE
Jacking up motorcycle front
4.1
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Taking front of motorcycle off work stand
4.2
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Secure the motorcycle against falling over.
–
Remove the work stand from the front.
Jacking up the motorcycle in the middle (screw-in type)
4.3
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Jack up the motorcycle at the rear. (
–
Move the handlebar to the straight-ahead position. Align the work stand at the front
with the adapters to the fork legs.
Front work stand (61029055300) (
Info
Always jack up the rear of the motorcycle first.
–
Jack up the motorcycle at the front.
100679-10
–
Remove screw
–
Remove screws
200598-01
–
Unplug connector
–
Remove screw
–
Remove screws
200599-01
p. 13)
p. 443)
.
. Take off the footrest bracket.
of the brake light switch. Remove cable binder
. Hang the brake fluid reservoir to the side.
. Hang the footrest bracket to the side.
10
.