30/ENGINE - WORK ON INDIVIDUAL PARTS
Work on the right idler
20.18
»
If the measured value does not equal the specified value:
–
Change the valve.
–
Check the valve stem diameter.
Valve - valve stem diameter
Exhaust
Intake
»
If the measured value does not equal the specified value:
–
Change the valve.
–
Check valve spring
»
If there is damage or wear:
–
Change the valve spring.
–
Measure the valve spring lengths.
Valve spring - length
New condition
Wear limit
»
If the measured value does not equal the specified value:
–
Change the valve springs.
–
Check cam lever
»
If there is damage or wear:
–
Change the cam lever.
–
Check cam lever axle
»
If there is damage or wear:
–
Change the cam lever axle.
–
Check valve spring support
»
If there is damage or wear:
–
Change the valve spring seat.
–
Check valve spring retainer
»
If there is damage or wear:
–
Change the valve spring retainer.
–
Remove bushing
–
Remove O-ring
–
Remove inner bearing races
Extractor (61229020000) (
–
Push on new bearing inner races
–
Mount the new O-ring
–
Mount the new bushing
200465-10
5.893... 5.970 mm (0.23201...
0.23504 in)
5.965... 5.980 mm (0.23484...
0.23543 in)
for damage and wear.
42.0 mm (1.654 in)
41.2 mm (1.622 in)
for damage and wear.
for damage and wear.
for damage and wear.
for damage and wear.
.
.
and
.
p. 445)
and
.
.
.
153