124-328 Punch Unit User Initial Set Up Rap; 124-331 Ess Rom Dimm Not Found Rap - Xerox workcentre 5335 series Service Manual

124-328 Punch Unit User Initial Set Up RAP

System Fail. Punch Unit User Initial Installation Screen Displayed. The notification from the
Finisher indicates that the Punch Unit was detected but the punch hole configuration is
unknown.
Procedure
Select the Punch Unit according to the instruction on the screen.
Status Indicator RAPs
124-328, 124-331

124-331 ESS ROM DIMM Not Found RAP

System Fail. Forgotten to install the ESS ROM DIMM (Standard ROM) (deleted because
unable to display). The system detected that the ESS ROM DIMM was not installed (deleted
because unable to display).
Procedure
Turn the power OFF and ON.
If the problem persists, perform the following:
Pull out and insert the Prt-Kit or the ROM DIMM (Standard ROM). Or, replace it.
07/2011
2-966
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation