Rep 8.5 Feed, Nudger, Retard Roll - Xerox workcentre 5335 series Service Manual

REP 8.5 Feed, Nudger, Retard Roll

Parts List on PL 11.10
Removal
NOTE: The replacement procedure shows Feeder 1 Feed, Nudger, and Retard Rolls; the pro-
cedure for Feeders 2, 3, and 4 are the same.
NOTE: The Feed, Nudger, and Retard Rolls (3) must be replaced at the same time.
NOTE: After replacing the Feed, Nudger, and Retard Rolls reset the
feeder.
1. Remove the Paper Tray REP 7.1.
2. Slide the guide to the front (Figure 1).
Figure 1 Guide
3. Remove the Feed, Nudger, and Retard Rolls (3)
a. Release the locking tab and slide the roll off the shaft.
Repairs & Adjustments
REP 8.5
HFSI Counter for that
Guide
(Figure 2).
07/2011
4-66
BUS Updated 12/2011
Locking tab
Figure 2 Removal
Replacement
1. To install, carry out the removal steps in reverse order.
Initial Issue
WorkCentre 5335 Family Service Documentation