Table of Contents
Advertisement
027-519 Scanning Picture Preservation Place Error in
SMB RAP
Job Fail. Scan image storage destination or file name specification error during scanner (Save
to PC) SMB transfer.
There is a problem with the storage destination or file name of the specified scan image
during scanner (Save to PC) SMB transfer.
–
The specified storage destination does not exist on the server.
–
A prohibited character was detected in the specified storage destination or file name.
–
The specified storage destination is linked to a different shared folder due to the dis-
tributed file system (DFS).
Procedure
Take any one of the following actions:
–
Check if the storage destination is correct.
–
Check that the specified file name can be created on the SMB server.
–
Check for the settings of the distributed file system (DFS) with the system adminis-
trator.
The checking procedure is as follows:
1.
On the SMB server, select the [Start] menu > [All Programs] > [Administrative Tools]
> [Distributed File System].
2.
Select the specified storage destination from the left pane of the [Distributed File
System] and check the [Target] information displayed in the right pane of the window.
3.
Based on the information, specify the SMB server, shared name, and storage desti-
nation directly.
Status Indicator RAPs
027-519, 027-520
027-520 File Name Acquisition Failure RAP
A failure in acquiring a file name/folder on the SMB scan server.
Procedure
Check the access rights to the SMB scan server. Turn the power OFF then ON.
07/2011
2-456
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation
Advertisement
Table of Contents
