Xerox workcentre 5335 series Service Manual page 1178

(1)Remove Self-tapping Screws (5).
(2)Remove Screw.
(3)Remove Stacker Assembly.
Figure 6 Removing the Stacker Assembly
12. Remove the Actuator (Figure 7):
(1)Unhook.
(2)Remove Actuator.
Figure 7 Removing the Actuator
Initial Issue
WorkCentre 5335 Family Service Documentation
13. Move the Bearing
(1)Remove E-Clip.
(2)Move Bearing in the direction of the arrow.
14. Remove the Stacker Shaft Assembly
(1)Remove Stacker Shaft Assembly in the direction of the arrow.
Replacement
1. Reverse the removal procedure for replacement.
07/2011
4-119
BUS Updated 12/2011
(Figure 8):
Figure 8 Moving the Bearing
(Figure 9):
Figure 9 Removing the Stacker Shaft Assembly
Repairs & Adjustments
REP 12.17