Rep 5.14 Registration Chute - Xerox workcentre 5335 series Service Manual

Figure 2 DADF Feed Motor Pulley Install
Initial Issue
WorkCentre 5335 Family Service Documentation

REP 5.14 Registration Chute

Parts List on
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the DADF Front Cover.
3. Remove the DADF Rear Cover.
4. Remove the DADF.
5. Remove the DADF Document Tray.
6. Remove the DADF Feeder Assembly.
7. Turn the DADF Feeder Assembly upside down.
8. Remove the Registration Chute.
(1) Remove the self-tapping screws (x2).
(2) Remove the Registration Chute.
Replacement
1. To install, carry out the removal steps in reverse order.
07/2011
4-27
BUS Updated 12/2011
PL 51.8
(REP 5.3)
(REP 5.4)
(REP 5.1)
(REP 5.9)
(REP 5.5)
(Figure 1)
Figure 1 Registration Chute Removal
Repairs & Adjustments
REP 5.13, REP 5.14